Chapter 1: Pearl Docking Station
Docking Station Operation
1) Install a nose cone plug in the nose cone of the accessory imaging bed (Figure 1-8) and install
the imaging bed on the Pearl
®
Imaging System Docking Station. Lock the imaging bed in place
using the guide pins and locking handle as described in Chapter 2. Consult the appropriate
chapter in this manual for any additional instructions for the specific imaging bed you are
using.
WARNING:
Make sure a black nose cone plug is tightly inserted in the nose cone before
turning on the anesthesia gas. Failure to insert a nose cone plug will result in the release of
isoflurane gas.
AVERTISSEMENT:
Assurez-vous qu'un bouchon noir pour cone de nez est bien inséré dans chacun des cones de
nez avant de brancher le gaz anesthésiant. L'absence de bouchon peut provoquer une
décharge de gas.
Figure 1-8. Nose cone plug
inserted in a nose cone.
2) Press the power button on the docking station front panel (Figure 1-9).
Page 6
Summary of Contents for 5700-DS
Page 1: ...Pearl Trilogy Accessories Manual...
Page 2: ......
