-205-
v7.3
Rescue System
Meshlium
X
treme
To create the rescue you have to:
•
Start
unetbootin
and select the option “Diskimage”
•
Select the iso of the rescue image in the file selector
•
Select the USB unit where the image will be written
•
Click “OK” button to start the process
In some minutes the image will be written and the USB will be ready to use.
To apply the rescue in Meshlium:
•
Power off the device
•
Plug the USB pendrive in the micro-USB connector trough a USB-OTG cable
Figure: USB pendrive connected to Meshlium
•
Power on the device
•
When the rescue starts, Meshlium will emit a beep. The process can take a few minutes, so be patient.
•
When the rescue process finishes, Meshlium will emit several beeps to notify
•
Power off Meshlium and unplug the USB pendrive
•
Your Meshlium should be now in a default state. It can be powered on now. The user can access Manager
System with default credentials and start the setup fresh and use Meshlium normally.