-41-
v7.3
Network interfaces setup
Meshlium
X
treme
The proxy can be enabled or disabled from the control of the interface.
Figure: Proxy enable control
Figure: Proxy disable control
Note:
Currently the proxy feature is only available for visualizer plugin. This feature will be gradually included in other
services.
9.6. No-IP setup
This plugin allows to setup a No-IP account (
https://www.noip.com
) for dynamic IP remote access.
Configure the following parameters with the information of a valid and active No-IP account, previously created
in the No-IP platform:
•
Hostname:
Name of the host to link with the Meshlium IP
•
Username:
No-IP account username
•
Password:
No-IP account password
•
Interval:
Update interval in minutes
Figure: NoIP setup plugin