-4-
Meshlium
3. Meshlium’s Hardware Setup
This is the easiest hardware setup for Meshlium. Make sure you know how to do this setup.
1. Take the Meshlium casing and unscrew the Ethernet connector cap shown in the drawing.
2. Join the end that has the IP65 protection of the IP65 Ethernet cable to said connector and screw the cap on to fix it.
* In the case you want to use the 4G radio, unscrew the other connector cap, and insert your micro-SIM card in the External SIM socket with care.
3. Connect the other end of the cable to the PoE input marked “PoE”. Make sure that the PoE is indoors.
4. Take the supplied PoE power adapter and plug it into the corresponding PoE connector.
5. Plug the other end of the adapter into the 220V socket and your Meshlium is now ready to operate.
Figure : How to connect Meshlium to 220V
At Libelium we offer equipment for operating at 12V, do not use other power supplies.
Summary of Contents for Meshlium
Page 1: ......