DL-SC41U-TX Owners Manual
4
The DigitaLinx DL-SC41U-TX is a 4x1 multi format A/V presentation auto switcher that supports video
resolutions up to 4K@60Hz 4:4:4 8bit deep color, is HDCP 2.2 compliant and has a built in USB 3.0
switching hub for control and integration of USB devices such as USB cameras and microphones. The
switcher features four video inputs; (2) HDMI, (1) Display Port and (1) USB-C. The USB-C input supports
video, data (USB host) and power charging up to 40w. There is a 2 port USB client hub built with 2
USB host ports that can be switched independently or can be assigned to follow a video input so
when the video input is triggered or switched, the defined USB host port will also switch. The switcher
features two matrix outputs; HDMI and HDBaseT 2.0. The built in HDBaseT 2.0 transmitter output
supports long distance transport of audio, video and High Speed USB 2.0 signals up to 190Mbps up to
70 meters / 232’ using one category cable. The switcher is compatible with the DL-SCU-RX HDBaseT
2.0 receiver (sold separately) and the receiver can supply power to the DL-SC41U-TX remotely when
used in this configuration.
NOTE:
When using the DL-SCU-RX HDBaseT 2.0 receiver, it will not provide
power charging to the USB-C input unless the DL-SC41U-TX is also powered.
The DL-SC41U-TX gives you the ability to automate the display power ON by using pre-loaded RS232
commands whenever a video signal is introduced to the system using any A/V input. It will also turn
the display power OFF after a specified amount of time has passed when no video signal or switching
activity is present. For a complete list of programming commands to automate display power status,
please see the complete owners manual online at
www.libav.com
or by using the QR code on the print
page of this guide.
The DL-SC41U-TX can be controlled via front panel buttons or by API commands using RS232 or
Ethernet. A web server / GUI is built in that features A/V and USB switching control, automatic display
control and input EDID management.
The DL-SC41U-TX is ideal for software based video teleconference rooms that require the consolidation
and sync of A/V and USB signals from a laptop or room PC.
NOTE:
The DL-SC41U-TX switcher can be used as a standalone switcher or paired with an HDBaseT
receiver. The DL-SCU-RX HDBaseT 2.0 receiver (sold separately) is required to complete an extension
circuit. When using the DL-SCU-RX, only USB 2.0 Full Speed devices can be used on the receiver.
Product Overview
Product Contents
•
DL-SC41U-TX 4X1 HDMI / USB Switcher
•
(1) Quick Install Guide
•
(1) 3 pin Phoenix Male Connector
•
(4) Plastic Cushions
•
(2) Mounting clips with 4 screws
•
DC24V Power Supply with US, UK, EU and AU adapter plugs
