INT-PS82-H2 Installation Guide
17
On Screen Display (OSD) Menu
The OSD menu will allow you to set audio, video and other system settings by either using the front
panel buttons on the switcher or by the supplied IR remote. There are two ways to access the OSD
controls on the INT-PS82-H2.
1) Press and hold the MENU/2S (AUTO) button on the front panel of the
INT-PS82-H2 for 2 seconds
2) Press the MENU button on the IR remote
To control direction and selection of menu options, use either the front panel buttons or IR remote to confirm
selections.
Navigate to a desired menu / submenu option to change or adjust settings using the front panel buttons
or using the IR remote. Press
ENTER
on the front panel buttons or the OK button on the IR remote for
settings to take place.
NOTE:
When turning OFF HDCP support in the OPTION menu, encrypted HDCP content will not pass.
Accessing OSD Menu
Menu Options
There are 5 menu options in the OSD menu;
PICTURE:
Picture mode, color temperature and aspect ratio settings for outputs
SOUND:
Volume and mute settings control for the outputs
OPTION:
Output resolution settings, allows HDCP to be turned either ON or OFF for output support
SYSTEM:
Allows for factory reset to be initiated
INFO:
Displays current output resolution, sofware (SW) version and current IP address settings.
