INT-PS82-H2 Installation Guide
19
The
Video
menu allows you to route A/V signals to the HDMI and HDBaseT output of the switcher, enable
/ disable auto switching mode for each output and save and recall video switching presets. By default the
INT-PS82-H2 is set to auto switching mode.
To switch the video route for either HDMI and HDBT outputs, check the 1-8 buttons corresponding to the
desired input, only one input can be selected at one time for each output.
To enable / disable auto switching mode, check the
AUTO
button.
To save or recall video presets, click the desired preset button and click
SAVE
or
RECALL
.
VIDEO SWITCHING