Page
2
of
15
Liberty XL kit contents:
- 6mm EPP Pcs
- 9mm EPP Pcs
- Plywood accessory pcs
- Dubro micro EZ links 2 pcs
- 10 Wire Z bends
- 2 Wire L bends
- Shrink wrap
- Fiberglass drywall tape
- Carbon fiber spars, control rods, and
trussing
Carbon fiber should be precut to these lengths.
Small flat carbon spars
-16.750" x 4 (trailing edge of each aileron)
3mm tube (spars)
-
7” x 2 (fuse)
-
6” x 5 (foam struts, rudder, and servo support)
-
14.5” x 1 (elevator)
-
25.25” x 2 (fuse)
-
33” x 2 (wings)
1.5mm rod
-20.25" (elevator control rod)
-22.5" (rudder control rod)
-
4” x 2 (aileron control rod)
-5.25" x 2 (vertical control rods between ailerons)
-13.875" x 4 (wing trussing)
-5" x 2 (tail trussing)
-5.5" x 2 (tail trussing)
Start the build by gluing the 3mm carbon
tube spars into the grooves provided on
the foam. Foam-Tac works best.
