Viewfi nder
Navigation pad
Tripod mount
LED indicators
Speaker
I/O connector
Recording on/off
Menu
Focus
Function
Power
Stylus
Battery door
(SD slot inside)
Streaming indicator
Headset connector
Still image Capture
Microphone
Lens
Illumination ring
Streaming on/off
Antenna
ONSIGHT 2500 MAP
BASIC CONTROLS
NAVIGATION PAD
TURN POWER ON
Press and release the
button to turn the Onsight device on.
ENTER STANDBY
Press and release the
button quickly to go to Standby mode. The
Viewfi nder will turn off to conserve power but the Power LED remains on.
NOTE: Standby mode is automatic if the device is not used for a specifi ed
period (default is 2 minutes).
TURN POWER OFF
Press and hold the
button for 2 seconds to turn the Onsight device off.
BUTTON
LED INDICATORS
LED NAME
INDICATOR
Power
Green = On or Standby
Network
Green = Local Network available
Off = Local Network unavailable
Battery
Orange = Battery is charging
Off = Battery not charging
FUNCTION
Start or accept call
End a call
Volume up
Mic mute
Volume down
Front illumination light on/off
Pause/Play/Enter
Zoom / Manual Focus
SESSION STATUS
Press the
menu button once to see the call status, battery
life remaining and wireless signal strength.
STREAM STATUS
Press the
menu button twice to see zoom, stream quality
and video settings.
MAIN MENU
Press the
menu button three times to access the main menu.
CONTACTS DIRECTORY
Press the
button to display the Contacts window.
STATUS/MENU SELECTION
START AN ONSIGHT CALL
Display Contacts and use the stylus or navigation pad to select a
name from the list. Then press
to start the call. You will hear
outgoing rings or a busy signal.
ANSWER AN INCOMING CALL
To answer a call, press
.
TURN VIDEO STREAM ON OR OFF
When in a call, press the green button on top of the device to start
streaming video. Press it again to stop.
END A CALL
To end a call, press the
button.
RECORD A CALL
To record, press the
button. SD card must be installed for local recording.
1
2
3
