background image

42 

Warranty 

 
 

LIMITED WARRANTY 

 

Liebert Corporation extends the following LIMITED WARRANTY to the 
purchaser and to its customer (collectively referred to as the "Purchaser"): 
the enclosed Uninterruptible Power System (UPS) and components are 
free from defects in materials and workmanship under normal use, 
service, and maintenance FOR A PERIOD OF TWO YEARS FROM THE 
DATE OF ORIGINAL PURCHASE from Liebert or the Liebert dealer or 
retailer. THE FOREGOING WARRANTY IS THE ONLY WARRANTY 
GIVEN AND NO OTHER WARRANTY IS PROVIDED, EXPRESS OR 
IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY OR 
FITNESS FOR A PARTICULAR PURPOSE. Certain aspects of 
disclaimers are not applicable to consumer products acquired by 
individuals and used for personal, family, or household purposes (as 
distinguished from industrial or other purposes). Local laws may not allow 
limitations on how long an implied warranty lasts, so the above limitation 
may not apply to you. This warranty gives you specific legal rights, and 
you may have other rights, which vary according to local law. 
Certain repairs or services are the responsibility of the Purchaser and the 
Purchaser is expected to pay for them. This warranty does not extend 
either to products with removed or altered serial numbers or to any losses 
or damages due to act of God or source external to the product, misuse, 
accident, abuse, neglect, negligence, unauthorised modification, 
alteration, or repair, use beyond rated capacity, or improper installation, 
maintenance, application or use, including, without limitation, use in a 
manner contrary to the accompanying instructions or applicable codes.  
WARNING: Warranty is void if the battery is allowed to discharge below 
the minimum battery cut-off point. The battery must be recharged every 
four (4) to six (6) months when not in use. 
If the UPS fails to conform to the above warranty within the two-year 
warranty period, Liebert will repair or replace the UPS, at Liebert's option. 
Repairs or replacements are warranted for the remainder of the original 
warranty period. Purchaser, to make a warranty claim, should call to 
obtain a Returned Goods Authorisation number and shipping instructions. 
Return transportation costs to Liebert are the responsibility of the 
Purchaser. 

"LIFE SUPPORT" APPLICATIONS 

Due to the diversity of applications and considerations to be applied in 
each case, Liebert does not recommend or knowingly sells its products for 
such use. 

The responsibility for risk assessment and management in applications 
where the malfunction or failure of the UPS could be reasonably expected 
to give rise to a risk of human life shall be the sole responsibility of the 
purchaser. Liebert  accepts no liability for consequential harm in such 
applications. 

Summary of Contents for 12 bay














































Reviews: