4
IV
．
Setting Alarm Mode
Buzzer: Wake by Noise
Vibration: Wake by Vibrator
Both: Wake by Noise and Vibrator
V
．
Setting Buzzer Volume/ Vibration Intensity
HI: 85dB/ Strong Vibration
MED: 75dB/ Average Vibration
LO: 65dB/ Gentle Vibration
VI
．
Setting Brightness
Adjust to your preferred brightness level by turning the knob on the right side of the
clock.
TROUBLESHOOTING
1. In setting mode, if no operation within 8 seconds, the clock will automatically save
the current settings and return to time mode.
2. If AC power is interrupted, the clock enters battery-backup mode, now press
SNOOZE button, the time will display for 5 seconds for emergency situations.
3.If your clock displays irrelevant time or does not function properly, which may be
caused by electro- static discharge or other interference, unplug the DC jack to
disconnect the AC power (and remove the backup battery). The clock will be reset to
default settings and you need to set it again.
TAKING CARE OF THE CLOCK
1. Place your clock on a stable surface, away from sources of direct sunlight or
excessive heat or moisture.
2. Protect your furniture when placing your units on a natural wood and lacquered finish
by using a cloth or protective material between it and the furniture.
3. Clean your unit with a soft cloth moistened only with mild soap and water. Stronger
agents such as Benzene, thinner, or similar materials can damage the surface of the unit.
Make sure the unit is unplugged before cleaning.
4. If the unit will not be used for a prolonged period of time (i.e. one month), remove
the batteries to prevent possible corrosion. Should the battery compartment become
Summary of Contents for LLR010B
Page 3: ...1...
