LIFA Special Cleaner 20 /
25 Multi brushing machine
Congratulations on your new LIFA Special
Cleaner 20 or 25 Multi brushing machine!
LIFA SC20 / SC25 Multi is an electrically
operated brushing machine for ventilation
ducts. These brushing machines are de-
signed for the cleaning of small and me-
dium sized, round and rectangular shaped
air ventilation ducts. The length
of the cleaning shaft is 20 meters (66 ft.,
SC20) or 25 meters (82 ft., SC25 Multi),
so it can be used in cleaning up to 35 m
(115 ft., SC20) or 46 m (151 ft., SC25 Multi)
of ventilation duct when accessed in one
duct access door to both directions.
The speciality of LIFA SC20 is its small size
and user friendliness, especially in tight and
cramped places. Due to its small size, it can
also be packed and transported very easily.
The speciality of LIFA SC25 Multi is its wide
range of different sized nozzles which can
be used to spray air, liquids and foam.
Professional’s first choice for small (SC20:
Ø100–400 (4–16”)) and medium sized
(SC25 Multi: Ø250–800 mm (10–31,5”))
ducts. In addition, LIFA SC25 Multi can
also be used in grease duct cleaning up
to 60 cm duct diameter or duct height.
LIFA SC20 is not suitable for grease duct
cleaning.
•
Operation radius 18 meters (60 ft., SC20)
or 23 meters (75 ft., SC25 Multi).
•
Rotating speed can be adjusted from
225–570 rpm with a frequency converter.
•
Mechanically directed rotating direction
to clockwise and counter clockwise.
•
The brushed off debris is removed by
sucking it to a negative air vacuum, such
as a LIFA HepaClean 1100, 2500, 4000 or
LIFA AirClean 3500 negative air machine
unit (accessory).
The mechanical centering device for the brush is available as accessory for the LIFA Special
Cleaner brushing machine. The centering device helps to push the brush in the duct and
centers the brush in the duct so that the brush can reach all parts of the duct. The use of the
centering device is recommended especially in large and rectangular ducts.
LIFA Special
Cleaner 20
LIFA Special
Cleaner 25 Multi
3
