The following safety directions must be carefully observed in order to avoid
injury to personnel or damage to the environment or to the LIFA Special Cleaner
brushing machine itself. Following these instructions will ensure the safe and
uninterrupted use of the machine.
Safety Precautions
•
The equipment must not be positioned or use in places where there
is a risk of explosion or hazardous substances.
•
The equipment must not get wet and it has to be protected from
moisture, vibration and wind.
•
Foreign objects must not be inserted or fitted into the equipment.
•
The machine cannot be covered during the use.
•
The user must ensure that the appliance is adjusted for the task and
that the statutory requirements are met.
1. Avoid contamination of the
environment
The machine must be kept as clean
as possible. The shaft must be
cleaned before pushing it back to
the machine. The brushes and the
shell of the cleaning shaft must be
cleaned after the work has been
completed, before transporting the
machine to another location.
2. General safety
The power must be turned off and
the power cable unplugged when
the machine is not being used. It is
forbidden to make any modifications
to the brushing machine or the
accessories (for example brushes).
3. Operator safety
The person/persons performing the work must
use personal protective equipment: filtered
mouth mask, helmet, earmuffs, goggles, overall,
protection shoes and other necessary protective
equipment that the task at hand requires.
LIFA Special Cleaner brushing machines have a
strong rotating force. Clothes or hair can easily
get caught in the brush and cause damage or
accidents.
The brush must always be placed
in the ventilation duct before switching on
the machine
. The machine cannot be used
when the brush is outside the ventilation duct.
Because of the great rotating force, the LIFA
Special Cleaner is recommended to be used by
two persons. One person directs the shaft into
the duct while the other person feeds/draws
4
LIFA Special Cleaner 20 / 25 Multi
