EN14
EN15
Inspired by life
Settings & adjustments
Anti-tip supports
The anti-tip supports can be adjusted using
the pull knob (D).
There are 2 settings: activated and folded
away.
Armrests
The height and width of the armrests can be
adjusted.
Adjusting the height
1. Loosen the socket screw (E) a few turns.
2. Set the armrest to the required height.
3. Retighten the socket screw.
Adjusting the width
1. Loosen the screws (F) fully.
2. Set the armrest to the required width.
3. Retighten the screws.
Settings & adjustments
Legrests
Lower leg length
1. Loosen the M8 socket screw (A) one turn
on both sides. Socket screw (A) is located
underneath the zip fastener of the seat
cover.
2. S et the legrest to the required lower leg
length.
Attention:
•
Make sure the legrest is at least
5 cm off the floor.
3. Retighten the socket screw.
Setting the knee angle
1. Loosen the socket screw (B) one turn on
both sides.
2. Set the knee angle to the desired position.
3.
Retighten the socket screws on both
sides.
Setting the ankle hinge / foot rest
1. Loosen the socket screw (C) one turn on
both sides.
2.
Set the ankle angle to the desired
position.
3.
Retighten the socket screws on both
sides.
Anti-tip supports activated
Adjusting the armrests
Anti-tip supports folded away
D
Adjusting the armrests
E
F
Adjusting the lower leg length
A
Adjusting the knee angle
B
Setting the ankle hinge /
foot rest
C
