EN20
EN21
Push position
Settings and adjustments
Markings on the mobility scooter
There are a number of stickers on the mobility
scooter. Below is an overview of these stickers,
with their location.
CE sticker
The mobility scooter meets the Directive for
Medical Devices provisions and has a CE label.
The CE sticker can be found under the battery
cover (G).
Attention
Always replace the battery cover as this
protects the electronics.
To ensure that the cover is tightly closed, first
attach the top of the battery cover and then
the bottom.
Freewheel sticker (see also page 21)
The sticker above the freewheel lever indicates
the “push position”. In this setting the mobility
scooter can be moved freely.
The sticker below the free-wheel lever indicates
that the mobility scooter is ready to be
electrically driven.
Battery connection diagram
The battery connection diagram is located on
the inside of the battery cover. It also includes
the fuse and the motor controls.
Product description
You can set up the mobility scooter to meet
all your requirements. It is advisable that you
contact your supplier for the correct settings.
Adjusting the seat
Seat height
You can adjust the seat height to 4 different levels
using a mortise and tenon joint. You can select a
height of 42.5 cm, 45 cm, 47.5 cm of 50 cm.
Back angle
Attention
Only adjust the backrest when you are sitting
in the seat.
The maximum back angle (180°) is only
intended for transporting the seat.
Watch out for overturning:
if you have set up the seat with a large
back angle;
when driving up a slope;
when the slide system is in maximum rear
position.
1. Sit down on the seat.
2. Lift the lever (M).
3. Use your upper body to push the backrest
backwards into the desired position, or:
4. Bend your upper body forwards to allow the
backrest to move forward automatically.
5. Release the lever (M).
The backrest is now locked in its current
position.
Electric driving position
Adjusting seat height
(battery cover removed)
Change back angle
CE sticker
G
M
Logistiekweg 7
7007 CJ Doetinchem
T +31 (0)314 328000
Max. user weight 160 kg
* Rxxxxxxx_2012 *
Primo for indoor & outdoor use
FRONT
110 kg
Max.perm.axle load
REAR
220 kg
Max.perm.axle load
