EN30
EN31
Use of the Arrivo package
Use of the Arrivo package
Change back angle
You can adjust the
Captain seat
entirely as
desired. It is advisable to contact your dealer for
the correct settings.
Adjust back angle
Attention:
Only adjust the backrest when you are sitting
in the seat.
The maximum back angle (180°) is only
intended for transporting the seat.
Watch out for overturning:
-
If you have set up the seat with a large back
angle.
-
When driving up a slope.
-
When the slide system is in maximum rear
position.
1. Sit down on the seat.
2. Lift the lever (O).
3. Use your upper body to push the backrest
backwards into the desired position, or:
4. Bend your upper body forwards to allow the
backrest to move forward automatically.
5. Release the lever (O).
The backrest is now locked in its current
position.
Change armrest angle
N
Set backrest lumbar support
K
Armrests
Attention:
The position of the armrests changes if the
position of the backrest is adjusted.
1. Rotate the armrest upwards to the desired
angle.
2. Rotate the adjusting wheel (N) to lock the
angle of the armrest.
3. Loosen the adjusting wheel (N) to move the
armrest down.
Backrest lumbar support
1. Turn the button (K) once at a time.
This
changes the curve of the backrest.
2. Check whether the new setting has the
desired result.
There are 3 positions.
O
