Attach Deadshaft Covers
1.
Secure rear deadshaft cover to rocker arm using one screw.
Item
Description
Qty
1
Deadshaft Cover, Rear
2
2
M6 X 16 Phillips Pan Head Screw
2
1.5 Nm (13.3 in. lbs.)
2.
Add grommets to rear deadshaft cover. Interlock the front deadshaft cover into the rear deadshaft cover.
Item
Description
Qty
1
Deadshaft Cover, Front
2
2
Grommet
4
3.
Secure the front deadshaft cover to the rear deadshaft cover using two screws and two grommets.
4.
Position the gasket on top of the covers.
Item
Description
Qty
1
M4.2 X 19 Phillips Pan Head Screw
4
2
Gasket
(already attached)
2
1.1 Nm ( 9.7 in. lbs.)
NOTE: Repeat the procedure reversing front and rear
deadshaft covers for the remaining rocker arm. The
front cover used on the first rocker arm becomes the
rear cover on the remaining rocker arm.
Page 30 of 33
