25
Model:
CLSX (Integrity Series)
Tools Required:
Metric Hex Key Set, Screwdriver, Side Cutters, T-45 Torx Wrench
Note:
Proceed with the following steps before attaching the DISPLAY CONSOLE as described in the
CLSX
Assembly Instructions.
1. Remove the four SCREWS (a) and COVER PLATE (b) located on the CONSOLE SUPPORT BRACKET TUBE (c).
Note: Some models may have a plastic end cap instead of a cover plate.
2. Unwrap the power SUPPLY CORD (d) and COAXIAL CABLE (e) located within the
CONSOLE SUPPORT BRACKET TUBE (c). Route these cables through the
OPENING (f) of the TV MOUNTING BRACKET (g).
3. Locate the AUDIO / VIDEO / I-R REMOTE CONTROL CABLE (h). Route this
CABLE ASSEMBLY through the TV MOUNTING BRACKET with the 2-connector
end coming out the OPENING (f) of the TV MOUNTING BRACKET (g).
4. Secure the TV MOUNTING BRACKET (g) with four SOCKET HEAD SCREWS (s)
onto the CONSOLE SUPPORT TUBE (c).
CAUTION:
Do not pinch any cables when inserting the TV MOUNTING BRACKET
into
the CONSOLE SUPPORT TUBE.
5. Install the ATTACHABLE TV (i) onto the TV MOUNTING BRACKET (g) using
four nylon SHOULDER WASHERS (j), four FLAT WASHERS (k) and four
SCREWS (l).
6. Insert other end of the AUDIO / VIDEO / I-R REMOTE CONTROL CABLE ASSEMBLY (h) into the console connector.
a
b
c
i
d
e
h
f
g
s
c
h
j
k
l
