Life Fitness SU50 Assembly Instructions Manual Download

Page: 7 / 7

Seated Row SU50 Customer Assembly Instructions

Figure 9. Cable installation.

4. Reinsert the pulleys into the pulley housings and tighten the bolts.

Replace the

bolts, end cap washers, and end caps using the configuration shown in Figure 10.

Figure 10. Pulley bolt assembly configuration.

5. Attach the handle and clip to the cable.

Summary of Contents for SU50

Page 2: ...stomer Assembly Instructions 2 Figure 1 Seated Row SU50 1 Bolt holes on Seat Subframe 2 Bolt holes on Weight Stack Subframe 3 Cable Pulleys 4 Cable 0 1 2 3 4 5 6 Figure 2 Configuration for bolts end caps washers and nuts ...

Page 4: ...e of the SU50 place end cap washers and nuts onto the four bolt ends Tighten the nuts so that they are completely over the threads of the bolt upper bolt in Figure 5 When all the bolts are tight snap the end cap covers onto both sides of the bolts An end cap washer is shown in the lower part of Figure 5 Figure 5 Nuts end cap washers and end caps on the bolts ...

Page 5: ... Seat Subframe section you will need to remove the upper and lower pulleys to insert the cable Using two 9 16 socket or box wrenches remove the pulley bolts as shown in Figure 6 Set aside the pulleys end cap washers and bolt Pulleys are shown as numbers 1 and 2 in Figure 7 Figure 6 Removing the pulley bolt Figure 7 Upper and lower pulleys ...

Page 7: ...le installation 4 Reinsert the pulleys into the pulley housings and tighten the bolts Replace the bolts end cap washers and end caps using the configuration shown in Figure 10 Figure 10 Pulley bolt assembly configuration 5 Attach the handle and clip to the cable ...