5. Maintenance Procedures
Maintenance Schedule
ACTION
DAILY
WEEKLY
MONTHLY
AS NEEDED
CLEAN
Guide Rods
X
Shrouds
X
Hand Grips
X
WAX
Frames
X
INSPECT
Accessories
X
Paint
X
Cable
X
Hardware
X
Frame
X
Shrouds
X
LUBRICATE
Guide Rods
X
Clean
• Guide rods with a cotton cloth.
Wax
• Frames with a standard, non-abrasive, wax finish.
Inspect
• Cables. Look for wear or damage and proper tension. Pay close attention at bends and attachment points.
• Hardware. Check for loosening. Tighten as required.
• Frames. Inspect for wear and damage.
• For paint chips. Fill in immediately with manufacturers touch-up paint.
• Jam nut at top of weight stack for tightness.
Lubricate
• Lubricate guide rods with Break-Free® brand lubricant (part number SK50-P0005-0000). Apply the lubricant to a
cotton cloth, and then run the cotton cloth up and down the guide rods as needed.
NOTE: Only a few drops of lubricant are required for each guide rod.
Once a Day
• Wipe down upholstery with a mild soap and water or comparable all purpose cleaner.
• Visually inspect cables for wear at and around connections and along the entire length of the cable. Always replace
at first sign of wear.
Once a Week
• Visually inspect all hardware for loosening, tampering or wear.
• Check jam nut at top of weight stack for tightness.
• Inspect all accessories, connecting links, and carabiner clips for wear.
Page 37 of 48
