3
A
SSEMBLY
3.1
T
OOLS
& H
ARDWARE
Identify the following components after unpacking your cross-trainer:
M10 X 15MM SILVER HEX HEAD BOLT (QTY. 6)
M10 X 20MM SILVER HEX HEAD BOLT (QTY. 3)
M10 X 74MM SILVER HEX HEAD BOLT (QTY. 5)
FLAT WASHER 10MM ID (QTY. 2)
LARGE FLAT WASHER (QTY. 2)
WAVE WASHER (QTY. 2)
M3.5 X 12MM BLACK PHILLIPS HEAD SCREW (QTY. 4)
M3.5 X 8MM CLEAR ZINC PHILLIPS HEAD SCREW (QTY. 4)
M5 X 12MM BLACK PHILLIPS HEAD SCREW (CONSOLE MOUNTING) (QTY. 4
)
M5 X 12MM SILVER PHILLIPS HEAD SCREW (QTY. 8)
M10 HEX NUT (QTY. 2)
M5 X 8MM BLACK PHILLIPS HEAD SCREW (QTY. 4)
10
70
60
20
80
30
90
40
100
120
50
110
130
140
150
160
8
Tools Needed for Assembly:
•
Phillips Head Screwdriver
•
17mm Socket Wrench
•
17mm Open End Wrench