3.7
A
SSEMBLE
M
OVING
A
RMS TO
P
EDAL
A
RMS
;
P
EDAL
/ M
OVING
A
RM
J
OINT
P
IVOT
C
OVERS
Parts:
Hardware Bag #4
(2, M10 X 74mm Silver Hex Head Bolts)
(2, M10 Hex Nuts)
(4, M5 X 8mm Black Phillips Screws)
Tools:
17mm Socket Wrench, Phillips Screwdriver
Lift the front end of the user left pedal lever (K) to meet the left rocker arm clevis (L). Secure the pedal lever to the rock-
er arm clevis using one M10 X 74mm Silver Hex Head Bolt (9) and one M10 Hex Nut (10). Tighten the bolt and nut
securely. Repeat the procedure for the right pedal lever and rocker arm clevis.
Attach the left side lower pivot covers (M) over the moving arm/pedal arm pivot point. Snap the cover together over the
moving arm/pedal arm pivot point and use two M5 X 8mm Black Phillips Screws (11) to attach. Repeat for right side.
Note:
Left and right covers are identical.
11
M
10
K
9
L
11
