Tools Needed:
17mm Socket Wrench, Phillips Screwdriver
Step 1
Packaging
Parts
:
None
Remove all packaging and place main components to the side of the box. Break box down in each of the four
corners.
NOTE:
Use care when removing the foam blocks that support the pedal arms. Follow the unpacking instruction
sheet attached to the foam blocks.
Step 2
Assemble the Stabilizers
Parts:
Hardware Bag #1
(4, M10 x 15mm Silver Hex Head Bolts)
Tools:
17mm Socket Wrench
Assemble the stabilizer tubes (feet) (A) to the bottom base brackets (B) of
the product using two M10 x 15mm Silver Hex Head Bolts (1) on each
stabilizer tube. Both stabilizer tubes (feet) are identical.
11
Summary of Contents for X8
Page 12: ...9 2 ASSEMBLY INSTRUCTIONS Parts List ...
Page 13: ...10 ...
