13
ADJUSTMENTS
Adjusting the Tension Control Knob
To increase the tension, turn the tension control knob in a
clockwise direction.
To decrease the tension, turn the tension control knob
in a
counter-clockwise direction.
Adjusting the Adjustable Leveler
Turn the adjustable leveler on the rear stabilizer as needed, to
level the upright bike.
Adjusting the Seat Height
Turn the round knob in a counter-clockwise direction until it
can be pulled out. Pull out the round knob and then slide the
seat in a post up or down direction to a suitable position.
Lock the seat post in place by releasing the round knob and
sliding the seat post up or down slightly until the round knob
"pops" down into a locked position. For added safety, tighten
the round knob in a clockwise direction.
NOTE: When adjusting the height of the seat post, ensure
that the bushing does not exceed the mark line on the
seat post.
Adjusting the Seat Forward or Back
Turn the seat adjustment knob to loosen the seat sliding
tube. Slide the seat sliding tube forward or back to the
desired position and turn the M8 seat adjustment knob to
tighten.
NOTE: Before exercising, continue to turn the seat
adjustment knob until the seat sliding tube is secure.
Tension Control Knob
Adjustable Leveler
Round Knob
Seat Adjustment Knob
