7
ASSEMBLY INSTRUCTIONS
1. Front and Rear Stabilizers Installation
Insert both M10 Adjustable Levelers (53) into the threaded holes on the underside of the
Rear Stabilizer (57). Turn both M10 Adjustable Levelers (53) by hand in a clockwise
direction until snug.
Position the Rear Stabilizer (57) behind the Main Frame (41) and align bolt holes.
Attach the Rear Stabilizer (57) onto the rear curve of the Main Frame (41) with two M8x70
Bolts (26), two M8 Cap Nuts (28), and two Ø8 Big Curve Washers (45). Tighten bolts with
the Multi Hex Tool with Phillips Screwdriver provided.
Position the Front Stabilizer (25) in front of the Main Frame (41) and align bolt holes.
Attach the Front Stabilizer (25) onto the front curve of the Main Frame (41) with two M8x70
Bolts (26), two M8 Cap Nuts (28), and two Ø8 Big Curve Washers (45). Tighten bolts with
the Multi Hex Tool with Phillips Screwdriver provided.
Hardware:
(26) Bolt M8x70
4 PCS
(28) Cap Nut M8
4 PCS
(45) Big Curve Washer Ø8
4 PCS
Tool:
Multi Hex Tool with Phillips
Screwdriver S13, S14, S15
10
31
26
28
45
41
26
28
45
25
57
53
53
