9
3. Install the Backrest Support Bracket and
Handlebar.
Attach the Backrest Support Bracket (1) onto the Rear
Main Frame (3) with four M8x15 Bolts (23), Ø8 Flat
Washers (24), and two M8 Cap Nuts (71).
Attach the Handlebar (13) onto the Backrest Support
Bracket (1) with two M8x45 Bolts (70), two Ø8 Curve
Washers (25), two Ø8 Flat Washers (24), and two M8
Cap Nuts (71).
Connect the Hand Pulse Sensor Wires (68) from the
Handlebar (13) to the Extension Hand Pulse Sensor
Wires (65) from the Rear Main Frame (3).
4. Install the Computer.
Remove four M5x12 Bolts (39) from the Computer (9).
Connect the Extension Wires (63) and Extension
Sensor Wire (64) to the wires that come from the
Computer (9) and then attach the Computer (9) onto the
plate of the Front Handlebar Post (6) with four M5x12
Bolts (39) that were removed.
5. Install the Seat Cushion and Back Cushion.
Remove four M6x15 Bolts (21) and Ø6 Flat Washers (58)
from the Seat Cushion (7). Then attach the Seat
Cushion (7) onto the Backrest Support Bracket (1) with
four M6x15 Bolts (21) and Ø6 Flat Washers (58) that
were removed.
Remove four M6x15 Bolts (21) and Ø6 Flat Washers (58)
from the Back Cushion (8). Then attach the Back
Cushion (8) onto the Backrest Support Bracket (1) with
four M6x15 Bolts (21) and Ø6 Flat Washers (58) that
were removed.
1
71
24
13
65
68
24
23
24
23
3
9
8
58 21
1
3
7
58
21
70
25
63
64
39
13
6
71
71
3
4
5
