14
5. Computer Installation
Remove four M5x12 Bolts (57) from the back of the Computer (56). Remove bolts with the
Multi Hex Tool with Phillips Screwdriver provided.
Insert the Hand Pulse Sensor Wires (6) from the Left/Right Handrails (4L, 4R) into the hole
on the Front Post (5) and then pull them out from the top end of the Front Post (5).
Connect the Sensor Wire I (67) and Hand Pulse Sensor Wires (6) to the wires that come
from the Computer (56) and then attach the Computer (56) onto the top end of the Front
Post (5) with four M5x12 Bolts (57) that were removed. Tighten bolts with the Multi Hex
Tool with Phillips Screwdriver provided.
Tool:
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
56
67
4R
4L
57
6
6
6