21
LIFE | M5 X NG
LifeIonizers.com/support
aMPERaGE aDJUSTMEnT (F20)
(
help video on LifeIonizers.com/support)
To enter into the F20 you will need to do the following:
nOTE:
The buttons must be pressed quickly as failure to do so will
result in booting you out of the program menu. The unit must be
dispensing water before pressing the buttons.
• Press and hold the
“MENU”
&
“FILTER 1”
buttons simultaneously
for 5 to 10 seconds
(or until F20 appears on screen)
.
• F20 will appear on the display screen.
• Below the F20, the amperage number will display and start flash-
ing. These numbers will vary depending on the level of alkaline
or acid you are on.
• Scroll through the alkaline and acid levels by pressing the
“ALKALINE”
or
“ACID”
button.
• Once you are on the level you want to adjust, the amperage
number will be flashing.
• To increase the amperage number, press and release the
“FILTER 2”
button.
• To decrease the amperage number, press and release the
“FILTER 1”
button.
• Repeat the process to adjust the other levels of alkaline or acid.
• To save your adjustments, press the
“PURIFY”
button and the
display screen will go back to its normal operation.
nOTE: You cannot adjust the
“PURIFY”
selection.
• For optimum performance of the unit, you will need to clean
your ionizer with the
CITRIC ACID CLEANING FILTER
also known
as the
SCALING FILTER.
We recommend using this cleaning
cartridge 3-4 times a year depending on the hardness of your
water.
