www.LifeIonizers.com/Support
20
75
M7/M7 UC NG
20
FUNCTIONS F-30 AND AFTER
To enter F-30 and after functions you will need to do the following.
• Press and hold the
“MENU”
&
“FILTER 1”
buttons simultaneously for
5 seconds.
• The machine will display F20 and the screen.
• Press and release the
“MENU”
button continuously to scroll through
the other
F-functions
.
PLATE SELECTION (F-30)
• Select number of plates (5,7,9,11 & 13)
UNITS COME PRE-SELECTED
LANGUAGE SELECTION (F-40)
• Select preferred language.
(English is the default language)
1- Korean
2- English
3- Chinese
4 -Russian
5 -Spanish
PH DISPLAY OPTIONS (F-50/F-51)
• Default will show pH setting only
• pH Ho - Fixed level (use this level)
• pH En - Adjustable level
CLEANING (F-60)
(reverses the electric power to clean the plates)
(1) Washes beginning & end of water usage
(2) Washes at the beginning only
(default setting)
(3) Washes at the end only
(4) Does not wash at all
F-70 AND AFTER FOR ENGINEER USE ONLY
DO NOT CHANGE. LEAVE AT DEFAULT SETTINGS.
1st FILTER SETTING (F-70) 3,000 liters
(30 is default setting)
2nd FILTER SETTINGS (F-71) 6,000 liters
(60 is default setting)
WATER FLOW CHECK (F-80)
(0 is default setting)
RUN TIMER (F-81) 10 minutes
(10 is default setting)
To show the power consumption and water flow information,
press the “Menu” button and “Filter 1” button simlutaneously and
hold down for about 8 seconds.
Summary of Contents for M9 Next Generation
Page 1: ......
Page 50: ...revised 3 4 15 ...