www.LifeIonizers.com/Support
19
75
M7/M7 UC NG
Tips After Filter Replacement:
1) Select the “Purified Water” setting and let the water run for 3-5 minutes after any
filter replacement .
2) If the machine has not been used for a few days, let the water run for 3-5 minutes
at the “Purified Water” setting before making Ionized Alkaline water for consumption.
3) Consult with the installer or retailer on the purchase of filters if in question about
usage or installation.
Countertop Filter Reset
* After changing the first filter, you
can reset it by pressing and
holding the “ACIDIC” button for 10
seconds and you will hear 2 beeps.
* After changing the second filter;
you can reset it by pressing and
holding the “ALKALINE “ button
for 10 seconds and you will hear
2 beeps.
For volume control, press the “PURIFIED” button
for 5 seconds. All control settings (“ALKALINE”,
“ACIDIC” & ‘PURIFIED”) buttons will light up.
* To increase volume, press the “ACIDIC” button.
* To decrease volume, press the “ALKALINE” button.
1. After changing the first filter,
press and hold the “FILTER 1”
button for 10 seconds. You will
hear 2 beeps and the filter counter
indicator will reset to 3000.
Undercounter Filter Reset
2. After changing the second filter,
press and hold the “FILTER 2”
button for 10 seconds. You will
hear 2 beeps and the filter counter
indicator will reset to 5000 or 6000.
Filter 1
Filter 2
Volume Control
Filter Reset Instructions
25
www.LifeIonizers.com/Support
(
help video on LifeIonizers.com/support)
NOTE:
After you reset filter counter, turn on your machine.
It will automatically wash your filters.
Summary of Contents for M9 Next Generation
Page 1: ......
Page 50: ...revised 3 4 15 ...
