www.LifeIonizers.com/Support
46
75
M7/M7 UC NG
Q: Do I need to hire a plumber to install the units?
A: Most people find it is not necessary to call a plumber
for most standard installations. For custom installations,
a plumber may be needed depending on the individual
circumstances.
Q: What do I do if the filters are leaking?
A: It is important to note where on the filter it is leaking.
Most leaking comes from fittings that are not seated
properly. Reseat the tubing into the filter by pushing in
firmly and then pulling back. It may be necessary to re-trim
the end of the tubing to get a fresh surface. Make sure to
shut off the water before working with the water supply
lines.
Q: How do I set up the pre-filter unit?
A: The pre-filter is installed in the supply line on the ionizer.
Quick connects are provided for your convenience. Simply
push the tubing in the connector and it seals automatically.
When installing the filter for the first time, it is suggested
to let the filter fill with water for a few minutes before
turning on the ionizer.
Q: How do I know what pre-filter I need?
A: A water report is necessary to determine what type of
filter is needed. Well water may need to be tested by an
independent water testing company. Please contact your
sales representative and they will pull your Federal Water
Report, analyze it, and recommend filters.
Summary of Contents for M9 Next Generation
Page 1: ......
Page 50: ...revised 3 4 15 ...