OPERATING INSTRUCTIONS
1. Power the Display On/Off and Select Desired Mode
Or
Turn the heater on by pressing the ON/OFF button on the
control panel or by pressing the Power button on the
supplied remote control.
Note: Powering off the heater will stop the heating process
only. The fan will continue to blow for approximately 3
more minutes to allow for the interior components to cool.
The fan will then turn off automatically.
Or
Select a heat Mode
Press the MODE button to toggle between the three heat
modes.
High Mode uses 1500W; Low Mode uses 750W. ECO mode
is an Economic Energy Saving Function. When ECO mode
is chosen,the heater will manage itself from less to more
heating power (watts) in an attempt to maintain a constant
warm 68
℉
(20
℃
).
2. Setting DesiredTemperature
Or
Or
Adjust the desired temperature by pressing the Up/Down
arrows on the control panel or remote control.
Or
Desired temperature options varyfrom 59
℉
to 86
℉,
or
from 15
℃
to 30
℃
.Once you have chosen the desired
temperature, the heater will remain on until the room
temperature increases to the temperature on the digital
display. The heater will cycle on and off to maintain the
desired room temperature.
Or
Press
℃
/
℉
button to change the display temperature
between Fahrenheit and Celsius.
The Fahrenheit indicator LED will light when the
temperature is displayed in Fahrenheit.
The Celsius LED will light, when the temperature is
displayed in Celsius.
Summary of Contents for LS1002HH13
Page 40: ...40 ...