12
TEST MODES AND ADJUSTMENTS
Your grill l is already set up from the factory and ready to grill below are the test modes
available and adjustments
1 . Test Mode - With grill OFF, press and hold the Probe Temp and Temp Down buttons
to enter the button test Mode until all digital display and LEDs turn on . Press Pro-
beTemp button it displays “S-1”, press I/O button it displays “S-2”, press Temp Down
button it displays “S-3”,press Temp Up button it displays “S-4”, Press Temp Display
button it display “S-5”, Each additional press of the Probe Temp button will advance
you through below next function test .
2 . Displaying “AUG”is test mode for your auger motor . You should be able to look in your
grills fire pot and see the end of the auger turning very slowly .
3 . Displaying “IGN” is test mode for your grills ignition system . You should be able to
look into grills fire pot and see your igniter begin to glow within a few minutes . DO
NOT TOUCH THE IGNITER .
4 . Displaying “FAN” is test mode for your grills blower fan . You should be able to hear
the fan blowing .
5 . Displaying Actual Grill Temp
6 . Displaying Actual Meat Probe Temp A
7 . Displaying Actual Meat Probe Temp B
8 . Return to OFF state
