background image

 

--SAVE THESE INSTRUCTIONS--   

4

 

20.

 

Do not use this product to dry or heat clothing, shoes, pipes, or any other item. 

21.

 

Do not place or expose this product to water or other liquids. 

22.

 

Do not move the product

 

when it is heated.  Allow the product to thoroughly cool 

before handling it. 

23.

 

Do not run cord under carpeting and do not cover cord with throw rugs, runners or 
the like. Arrange cord away from traffic area and where it will not be tripped over. 

24.

 

To disconnect the product, turn the controls to the “OFF” position, then remove the 
plug from the electrical outlet. Disconnect the plug (do not pull on the Power Cord) 
from the electrical outlet. 

25.

 

Do not use attachments not recommended or sold by the product manufacturer, as a 
risk of fire, electrical shock, or serious personal injury may result. 

26.

 

Attachments, when furnished, may become hot during use.  Allow any attachments 
to cool before handling them. 

27.

 

To prevent a possible fire, do not block air intakes or exhaust openings in any 
manner. Do not use on soft surfaces, like a bed, where openings may become 
blocked.  

28.

 

To avoid a circuit overload when using this product, do not operate another high-
wattage product on the same electrical circuit. 

29.

 

Avoid the use of an extension cord because the extension cord may overheat and 
cause a risk of fire. 

30.

 

Do not allow the Power Cord to hang (i.e., over the edge of a table or counter) or 
place/run the Power Cord under rugs or in high-traffic areas where it may be tripped 
over or pulled.   

31.

 

Do not put any stress on the Power Cord where it connects to the product, as the 
Power Cord could fray and break. 

32.

 

Do not plug or unplug the product from the electrical outlet with a wet hand. 

33.

 

Keep the Power Cord and product away from heated surfaces.  

34.

 

When scrapping the heater, follow the regulations concerning the disposal of oil.  

35.

 

The heater should not be used in a room, of which the floor area is less than 5 M

2

36.

 

Use this heater only as described in this manual. Any other use not recommended by 
the manufacturer may cause fire, electric shock, or injury to persons. 

37.

 

This appliance is not intended for use by persons (including children) with reduced 
physical, sensory or mental capabilities, or lack of experience and knowledge, unless 
they have been given supervision or instruction concerning use of the appliance by a 
person responsible for their safety. 

38.

 

Children should be supervised to ensure that they do not play with the appliance. 

39.

 

If the supply cord is damaged, it must be replaced by the manufacturer, its service 
agent or similarly qualified persons in order to avoid a hazard. 

40.

 

WARNING: In order to avoid overheating, do not cover the heater. 

41.

 

heater must not be located immediately below a socket outlet. 

42.

 

Do not use this heater in the immediate surroundings of a bath, a shower or a 
swimming pool. 

43.

 

this heater is filled with a precise quantity of special oil. Repairs requiring opening of 
the oil container are only to be made by the manufacturer or his service agent who 
should be contacted if there is an oil leak; 

44.

 

when scrapping the heater, follow the regulations concerning the disposal of oil. 

 
 

Summary of Contents for YAA02E-11











Reviews: