34
G. Tear off
Hardware Loss Prevention
Sheet
.
H. Push
Base Top Cover
down into
position.
I. Attach
Console Mast Cover(18)
with
the four
M4x10L Screws
removed in
step 4A and four more in the hard-
ware bag for a total of eight.
Tools
needed:
Phillips head screwdriver.
J.
Inspect unit for excess packing
material and check that the roller
wheels are on the rails.
Step 6: Console Attachment
(continued)
D. Tuck wires inside
Console(6)
and
Console
Mast(4)
.
E. Slide
Console(6)
upwards so
the hook on back of console
slides under holding plate
to lock into position.
F. Attach
Console(6)
by
installing the
two
M5x10L
Bolts
and
M5 Washers
(that were
pre-installed
on back of
console)
through
slots in
upper mast.
5mm Allen
Wrench w/
Phillips
PRE-INSTALLED
Item #14
M4 x 10L Screw
(x4)
M4 x 10L Screw
(x4)
Console
Mast Cover
Base
of Cover
D
I
Slide
Lock
E
F
4mm Allen
Wrench
Assembling Your Elliptical
PRE-INSTALLED
M5 x 10L
(x2)