H
SI
L
G
N
E
5
GENERAL INFORMATION
It is strictly forbidden to copy or reproduce this instruction manual without written permission to do so by
LIFE home integration
and will be subject to
verification.
Translation into other languages of all
or part of the manual is strictly forbidden without previous written authorisation from
LIFE home integration
and will be subject to
verification.
All rights on this document are
reserved.
LIFE home integratio
will not accept responsibility for damage or malfunctions caused by incorrect installation or improper use of products and Users are therefore recommended to read this manual
carefully.
LIFE home integration
will not accept responsibility for damage or malfunctions caused by the use of the operator together with the devices of other manufacturers; such action will render the warranty void
LIFE home integration
will not accept responsibility for damage or injury caused by non-compliance with the installation, set up, maintenance and use indications contained in this manual and the safety instructions described
in the SAFETY INSTRUCTIONS AND WARNINGS
chapter.
With the aim of improving its products,
LIFE home integration
reserves the right to bring about alterations to them at any time, without giving
prior
notice.
This document conforms to the state of the automation at which it is provided when released for
sale.
INFORMATION ON THE MANUFACTURER
LIFE home integration
is the manufacturer of the
ACER
operator (and will hereinafter be referred to as manufacturer) and the owner of all rights concerning this
document.
The Manufacturer’s information
required by Machinery Directive 98/37/EC is given below:
•
Manufacturer:
LIFE home integration
•
Address:
Via I Maggio, 37 – 31043 FONTANELLE (TV) Italia
•
Telephone:
+ 39 0422 809 254
•
Fax:
+ 39 0422 809 250
•
http:
www.homelife.it
•
e-mail:
info@homelife.it
The identity plate bearing the information on the Manufacturer of the operator is
fixed
to the control
unit.
The plate
specifies
the type anddate (month/year) of manufacture of the
automation.
For further information on technical or commercial issues and technician call-out and spares requests, Clients may contact the Manufacturer or area representative from which the product was
purchased.
INTENDED USE
•
ACER operators are designed for opening and closing residential-type sliding gates only. Improper use or use on gates larger than those indicated in the TECHNICAL DATA chapter will
be considered non-conform to the intended use. The Manufacturer declines all responsibility for improper use. The owner accepts full responsibility for improper use, which will result
in the warranty being rendered void.
•
Any usage differing from that described above is forbidden.
•
The operator may not be installed or used in potentially explosive environments.
•
The Fitter must ensure that the environment in which the automation is installed is conform to the operator’s temperature range (see Technical Data chap.).
•
The operator is not suitable for use on gates with built-in doors unless the automation is prevented from functioning when the door is open.
• Motorised
gates must conform to current European standards and Directives, including EN 12604 and EN
12605.
• T
he operator may only be used when in perfect working order and in compliance with the intended use, in the awareness of safety and hazard conditions and in observance with the instructions for installation and
use.
• Any
dysfunctions that may pose threats to safety must be eliminated
immediately.
• The
gate must be stable, properly hung and resistant to
flexion
(it must not bend during opening and closure
movements).
• The
operator cannot compensate for faulty or incorrectly hung
gates.
• The
operator may not be used in environments prone to
flooding
• Do
not use the operator in environmental conditions characterised by harsh atmospheric agents
(e.g.
Salty
air).
SAFETY INSTRUCTIONS AND WARNINGS
•
These general rules must always be respected during the installation, connection, testing, trial run, use and maintenance of the automation.
•
The Manufacturer declines responsibility for damage or injury caused by non-conformity with the information supplied concerning installation, trial run, use and maintenance contained
in this manual, and the failure to observe the safety instructions given below.
•
The installation, connection, testing, trial run and maintenance of the operator must be performed by a COMPETENT PERSON aided and supervised by a PROFESSIONAL FITTER.
•
Given the technical, procedural, regulation and legal implications of the work, unauthorised fitters are not permitted.
•
Installation requires a practical and theoretical knowledge of mechanics, electronics and electrics, and of sector laws and standards.
•
Amateur installation is strictly forbidden as it does not comply with current standards and laws and therefore does not guarantee the safe operation of the automation.
•
Do not proceed with installation, connection and trial run in the event of doubts or indecision of any kind.
•
This manual must be read carefully and understood before installing the operator. If doubts arise during installation, contact a PROFESSIONAL FITTER or the MANUFACTURER.
•
Do not perform adjustments and/or parameter memorisation before installation is complete and only if you have understood the procedures described in this manual.
•
Only mount the operator on gates that are perfectly aligned with the sliding tracks and are properly hung. A gate that is not correctly aligned or hung can cause serious injury and/or damage to the operator.
•
The Manufacturer declines all responsibility for damage and faults to the operator caused by non-observance of the instructions contained in this
manual.
• Keep
this manual in a safe and easily accessible place so that it can be consulted rapidly when
necessary.
• During
installation, connection, trial run and usage of the operator, observe all applicable accident prevention and safety
regulations.
• In
the interests of safety and optimal functioning of the operator, only use original spares, accessories, devices and fastening
apparatus.
• D
o not perform alterations on any operator device or
component.
This type of operation may cause
malfunctions.
The Manufacturer declines all responsibility for damage caused by products that have been
modified.
• The
operator should not be used until the setting up procedure described in the STARTING UP chapter has been
performed.
• S
hould liquids penetrate inside the operator, disconnect the electricity supply and contact the Manufacturer’s Assistance Service immediately; use of the operator in such conditions may cause hazard
situations.
• In
the case of faults or problems that cannot be resolved using the information contained in this manual, contact the Manufacturer’s assistance
service.
Storage instructions and warnings
•
The manufacturer declines all responsibility for damage and faults to operator functioning caused by non-compliance with the storage instructions given below.
• The
operator must be stored in closed, dry places, at room temperatures of between –20 and
+70°C.
• Keep
the operator away from sources of heat and naked
flames,
which could damage it and cause malfunctions,
fires
or hazard
situations.
• Keep
the operator in a horizontal position, but not resting on the
ground.
Indications and warnings for use
•
It is the fitter’s duty to perform risk analysis and inform the user/owner of any existing residual risks. Any residual risk detected must be recorded in writing in this manual.
•
The following residual risks are usually present in moving gates: impact and crushing against the main closure surface; impact and crushing in the opening area; shearing between sliding
leaf and fixed part of the track and support during movement; mechanical risks caused by movement.
•
The Manufacturer will not accept responsibility for damage or injury caused by the non-observance of the information on use contained in this manual, and the failure to observe the safety
indications given below.
•
The Manufacturer declines responsibility for damage and malfunctions caused by non-compliance with the instructions for use.
•
Keep this manual in a safe, easily accessible place, so that it can be consulted rapidly when necessary.
• Never
touch the gate or moving parts when they are in
motion.
• Remain
at a safe distance when the gate is in motion: only pass when the gate is completely open and
immobile.
• Prevent
children from playing or standing in the vicinity of the gate or the control organs (radio control), the same precautions should be adopted for disabled persons and
animals.
• In
the event of malfunctions (noisiness, jerky movements,
etc.)
suspend the use of the automation immediately: failure to observe this rule may entail serious hazards, risks of accidents and/or serious
damage to the gate and the
automation.
Contact a PROFESSIONAL FITTER and in the meantime use the gate manually by disconnecting the operator (see the OPERATOR RELEASE
chapter).
• In
order to maintain the operator in
efficient
conditions, ensure that the operations indicated in the MAINTENANCE chapter are performed at the frequency indicated by a PROFESSIONAL
FITTER.
• S
hould liquids penetrate inside the operator, disconnect the power supply immediately and contact the Manufacturer’s Assistance Service; the use of the operator in such conditions may cause hazard
situations.
• If
a problem arises that cannot be resolved using the information contained in this manual, contact the Manufacturer’s assistance
service.
