4
Operator position and
stop
adjustment
1.
To unlock operator, insert key (1) and turn 360°anti-clockwise. From now
on, the operator is unlocked, see fig. OP2009.
2.
Take
the motor
cover off
(3)
by removing
screw (1)
. Remove the motor cover taking care not to damage the retaining clips.
Remove
screw (4) and
slide
cover from worm screw (5).
3.
Lift
the
operator and insert
the
drive
pin (1) in
the
hole of
the
front bracket (2), see
below
OP2009
OP20010
OP20011
OP20012
1
360° Unlock
1
3
4
5
1
2
2MANUALE (INGLESE) Life.indd 4
30-10-2008 15:17:09
