Included Lifebreath Digital Control - Part #99-DXPL02
Key Features:
7
Instruction Card
Mode
Button Dehumidistat
Button
RESET Button
20/40/60 High
Speed Button
Digital Control Operating Instructions (DXPL02):
Turning on the Control
Press and release the ON/OFF button . The light above will illuminate.
Setting the Ventilation Speed
Press and release the Fan button
to select one of the 5 fan speeds. The fan speed will be displayed on the screen beside the
Fan symbol
. Standby mode (Fan OFF) is indicated as speed 0. The fan will turn ON if required by a remote Timer (if installed).
20/40/60 High Speed Button
Press and release the 20/40/60 High Speed button to temporarily initiate HIGH Fan speed for 20, 40 or 60 minutes. Press
once for 20 minutes, twice for 40 minutes, 3 times for 60 minutes and 4 times to disable. The will appear on the screen and
the corresponding section of the clock will flash to indicate the time interval selected. When the timer runs out, the unit will return
to it's previous operating speed.
Setting the Mode of Operation
There are 5 modes of operation available with the DXPL02 control. Pressing the Mode button
will cycle through the different
modes of operation and they will be displayed on the screen.
ON/OFF
Button
Fan Speed
Button
5 speed fan setting
Standby setting (fan speed 0)
Electronic Dehumidistat
20/40/60 HIGH speed override button
Compatible with 99-DET02 Wireless Timers
Easy to read backlit LCD screen
Slim-line design
Connect to 3 wire 20 gauge low voltage wire
Five selectable modes of operation
•
Continuous Ventilation
•
20 min. Ventilation / 40 min. Recirculation
•
20 min. Ventilation / 40 min. OFF
•
10 min. Ventilation / 50 min. OFF
•
Continuous Recirculation
Service indicator
20/hr
40/hr
10/hr
50/hr
20/hr
40/hr
