5
Finding a Place for the Panel
The system control panel must be located with access to an incoming phone line and power. When
possible it should be centrally located and convenient to use. The panel should not be placed in or near a
bathroom or other areas of high humidity.
Plugging in the Phone Line
1. Plug in the small end of the included phone cord to a phone jack in your home.
2. Plug the large end of the included phone cord into the LINE jack on the back of the panel.
3. If you have a phone or answering machine it should be plugged into the PHONE jack on the back of
the panel.
Note
In order for your LifeCall 7000 panel to function properly, all devices in your home that use the phone line must be
connected to the LifeCall 7000 Panel PHONE jack. If you have multiple devices in your home and it is not practical to attach
them all to the LifeCall 7000 panel, contact your installer or dealer about special installation procedures that should be
performed.
LINE
PHONE
Power Switch
To Home Phone Jack
(Larger End of Cord)
To Phone or Answering Machine
To AC Outlet
Figure 3. Connecting the LifeCall 7000 System to AC Power and the Phone Line
