Page | 11
Step 8:
Tools Needed:
6mm Allen wrench: 2JC7
1) Locate bag labeled
Figure 8
.
2) Locate left and right handlebars.
3) (
See Figure 8
) Attach left handlebar to
handlebar assembly using Qty three
M8x16mm hex bolts. Using a 6mm Allen
wrench, tighten hex bolts tight.
4) Repeat for other handlebar.
Step 9:
Plug the AC adaptor into a power outlet and
into the machine. The AC inlet is located on
the user left side of the machine. Only a
DC
9V 1500mA
that comes with the unit should
ever be used to power the machine.
Once assembly is complete; if needed, tighten
or loosen the levelers on the bottom of the
machine to prevent the machine from
wobbling and to make the machine stable.
Tighten the leveler nut on top of the lever to
prevent them from moving.
Congratulations!
You have completed assembly of your CD550
Elliptical
AC Adapter Location
