Page | 19
How to Use the Manual Stride Length Adjuster
The CD550 is equipped with a manual stride length adjustment system. The purpose of this function
is to allow a user to change his/her stride length between 17" and 25". Changing the stride length will
increase/decrease the distance it takes to do one revolution during exercise. Adjust the stride
lengths according to what feels best for the user based on his/her height and exercise routine.
Step 1:
Loosen knobs
A & B
by turning them counter-clockwise about two times, make sure not to fully
detach knob
A or B
from the unit as they will detach from the unit.
Note: The number at the top of the indicator, which is on the side, will display the current
stride length of the unit.
Step 2:
While holding onto knob
B
, simultaneously pull outwards on knob
A
to disengage the locking pin and
hold it outwards. Using the same hand that is holding Knob
B
, slide the adjustment arm either up or
down, until desired stride length is achieved then release knob
A
to engage locking pin into place.
Step 3:
Tighten knobs
A & B
by turning them clockwise to lock them into place.
Repeat steps 1 thru 3 to adjust stride length on the other side.
WARNING: To prevent personal injury, make sure that both the right and left sides of the unit
are set to the same stride length. Every time a user works out, it is his/her responsibly to
make sure that the knobs on both sides are securely locked. Never adjust while a user is on
or using the machine.
STEP 1-Loosen
STEP 2-Adjust
STEP 3-Lock
B
A
ADJUST
HOLD
HOLD
