29
Sensor wire) and F1-2 (Hand Pulse Sensor wire.)
9
Check to see if the computer wire is connected properly with heart rate
wire.
9
Contact technical support toll free 1-888-815-5559
Has a
thumping or
clicking
sound
9
Check and retighten each pedal, use a long wrench to add torque. This
will allow the pedal to get a solid turn on the crank arm threads.
9
Hold the pedal in one place and check to see if there is horizontal or
vertical play in the pedal. If there is, remove the black cap on the side of
the pedal and tighten the nut that holds the pedal to the pedal shaft.
9
Check and see if the bolt that holds the crank arm is tight.
Unit wobbles
and is
unstable on
the floor
9
Check to see if the plastic end caps on the rear stabilizer bar are even
and are not broken.
9
If unit is placed on a really soft or hard surface, purchase a unit mat to
place under the machine.
9
Make sure that the stabilizer bars are assembled correct, double check
the assembly instructions.
Handle bars
are loose or
wobbles
9
Retighten the bolts using T-handle Allen wrench.
Specifications
Power
•
4 C batteries
Console
Programs
•
Low-Profile Console
•
12 Preset Programs
•
4 Heart Rate Control Programs
•
SCAN/TIME/SPEED/DISTANCE/ CALORIE/TARGET HEART
CONTROL/ENTER WITH NEW CONSOLE, MILE
Heart Rate
•
Two standard contact heart rate receivers
Resistance
Range
•
1 to 16 levels resistance
•
Computer program adjusted
Brake System
•
Internal Magnet System
Drive train
•
5 inch Pedal Spacing to Reduce Joint Stress
•
650J6 Drive Belt
Bearings
•
6003ZZTPX 6201ZZTPX
Frame
•
Steel Frame
•
Welded by both robot and man
Paint
•
Powder paint without LEAD
Plastic Covers
•
Scratch Resistant Coating on Shrouds
•
ABS
Upholstery
•
Infinitely Adjustable Slide-Seat-Track
•
Vertically Adjustable Seat Back
•
PVC+PU foam
Rubber Grip
•
HDR
Shipping
Specifications
•
Box Dimensions: (LxWxH) 51x11x26 in. (128x28x66 cm)
•
Gross Weight (Box Weight): 118 lbs.
Assembled
Specification
•
Weight (Out of box): 108 lbs.
•
Length: 44 in, Width: 24 in, Height: 42 in
