5
Assembly Tips
The LifeCore 850RB is made from the best materials and has been tested and received a quality
control review prior to its packaging to ensure the correct parts and proper fitting of each
component. This machine was designed to limit the amount of assembly needed by a customer.
Before assembly of your product, distinguish a proper and appropriate location for the unit
where there is easy access to an electrical outlet with a surge protector. Unpack the box in a
clear work area to allow smooth assembly. Remove all the parts from the packing material;
however, do not discard packing material until assembly is complete. Double check packing
materials to make sure no parts were left behind.
Note that some hardware may be preassembled to components to help with assembly and
tools have been provided to assist with assembly.
Tools Required:
13 mm wrench
15 mm wrench
Philips Screw driver
6mm Allen wrench
5mm Allen wrench
4mm Allen wrench
J11
KNOB
2
3
