Assembly Tips
The LifeCore LC-CD600 is made from the best materials and has been tested and received a
quality control review prior to its packaging to ensure the correct parts and proper fitting of each
component. This machine was designed to limit the amount of assembly needed by a consumer.
Before assembly of your product, distinguish a proper and appropriate location for the unit where
there is easy access to an electrical outlet and with a surge protector. Unpack the box in a clear
work area to allow smooth assembly. Remove all the parts from the packing material; however, do
not discard packing material until assembly is complete. Double check packing materials to insure
no missing parts were left behind.
Note that some hardware may be preassembled to components in order to help with assembly;
tools have also been provided to assist with assembly.
Visit our website for assembly videos: www.lifecorefitness.com
Tools Required
:
17mm socket wrench: 2JAX
17mm wrench: 2JAW
Philips screw driver: 2E3E
4mm Allen wrench: 0J3P
5mm Allen wrench: 0J3Q
6mm Allen wrench: 0J3V
Tube of Grease: 2K81
2E3E
0J3Q
0J3V
5
|
P a g e
Summary of Contents for LC-CD600
Page 2: ...2 P a g e...
Page 29: ...2 29 P a g e...
