8
|
P a g e
Assembly Figure 3
FIGURE 3
Tool Needed:
17mm socket wrench: 2JAX
Note:
Rub assembly grease on Pivot
Points prior to connecting handrail
linkage assembly arms.
¾
Locate bag labeled
Figure 3
¾
Locate the right and left Handrail
Linkage Assemblies
.
¾
(
See Figure 3
) Slide the left
handrail linkage assembly on to
the lever arm frame. Using Qty.
one 10.2x35 washer, Qty. one 10
lock washer and Qty. one
M10x1.5-20 bolt, secure arm into
place using a 17mm socket
wrench. Tighten Snug not too
tight.
¾
Place end cap on the handrail
linkage assembly.
¾
Repeat for right Side.
Summary of Contents for LC-CD600
Page 2: ...2 P a g e...
Page 29: ...2 29 P a g e...
