a)
STEP 5
Insert HANDLEBAR POST [007] into MAIN
FRAME [001] and secure by tightening
KNOB [105].
Slide HANDLEBAR [009] onto HANDLEBAR
P O S T [ 0 0 7 ] a n d s e c u r e b y t i g h t e n i n g
HANDLE [106].
Slide COMPUTER [800] onto HANDLEBAR [009].
a)
b)
5
STEP 6
Assemble PEDALS [202,203]. The right
pedal (marked R) is assembled in a clockwise
direction. The left pedal (marked L) is
assembled in a counter-clockwise direction.
Tighten well but avoid excessive force.
Recommended torque is 34 Nm (340 kgf/cm)
a)
NOTE:
The LEFT PEDAL [202] is reverse-threaded
.
STEP 4
Assemble the COMFORT PADS [121] on
H A N D L E B A R [ 0 0 9 ] b y s e c u r i n g 2 x
COMFORT PAD PLATE with VELCRO [010]
to HANDLEBAR [009] with 4 x BOLT [405] +
NUT [307].
Assemble the COMFORT PADS [121] on 2 x
COMFORT PAD PLATE with VELCRO [010].
b)
NOTE:
The COMFORT PADS [121] are held in
place with velcro, which means they can be
easily removed and repositioned if desired.
ASSEMBLY INSTRUCTIONS
121
010
405
009
307
800
007
106
009
105
001
c)
Secure WATER BOTTLE HOLDER [115] with
2 x BOLT 406.
b)
13mm
WRENCH
15mm
WRENCH
Clockwise
Counterclockwise
203
202
406
115
4mm
ALLEN
KEY
