5
The treadmill deflect to
the sides.
The treadmill is not adjusted.
Adjust the deviation of the
treadmill in accordance with
Chapter 8.
If you are unable to remedy the failure even with the above solutions, please contact
our specialist service as soon as possible.
13.
Error messages on the display
If there are any problems in running on the treadmill, the type of fault will appear on
the display. In the event that such a fault occurs, please contact our service center.
Code of
fault
Description of fault
Troubleshooting
E-01
Cable break or improper connection.
Malfunction of console or PCB.
Check that all cables are properly connected.
Contact the service center if necessary.
E-02
The power cord is not connected
correctly.
The PCB is damaged or short-circuited.
Check that the power cord is properly
connected. Contact the service center if
necessary.
E-05
Current overload.
Check for excessive friction. Use silicone oil to
reduce friction.
Make sure the belt is not overloaded.
E-07
Security key not connected.
Check that the security key is in the correct
position.
E-09
Loss of MTC communication signal.
Restart the treadmill. If the problem persists,
contact a service center.
14.
Guarantee
The product is protected by the warranty valid period in the country where the sale
was made. This warranty covers any manufacturing defects. It is not provided for wear
and tear due to normal use, defects and wear resulting from improper handling,
storage and use (example use for a purpose other than the product is) and any product
modifications. A stamped sales receipt is a warranty card.
Service Center: Rulyt s.r.o., Lounská 891, 438 01 Žatec, +420 412 150 172,
www.lifefit.pro
Importer and Distributor for the Czech Republic: Rulyt s.r.o., May 5, 435, Dobroměřice
440 01, www.rulyt.eu
Summary of Contents for TM-3200
Page 42: ...P ednastaven programy...
