STEP TWO: Attach back
Parts E and F
1.
Attach the back onto the base by aligning the two metal posts on the base with the metal
bracket-slots on the back.
When properly aligned, the back will slide down onto the base and automatically click into the
final position.
4.
Attach the Far Infrared heating element cords into the left-hand side of the control box. The
cord from the back cushion plugs into the lower socket and the cord from the foot cushion
plugs into the upper socket.
5.
Connect power cord to wall outlet. Turn power on. The On/Off switch is located on the top
left-hand side of the control box.
