Operating Instructions
Order #270778
Use pressure sensitive adhesive pad to attach to any flat surface.
Little
TIME
OR
TEMP
™
Remove sticker from face of thermometer.
To Install Battery:
(Fig. A) Battery type: AAA.
Insert battery by sliding battery door open and
inserting battery in direction as indicated.
Back Light:
Press and hold “LIGHT” button.
(Fig. B)
Water or Air Temp:
(Fig. B) Slide switch upward
to “AIR” for room temperature. Slide switch
downward to “WATER” for Aquarium temperature.
Place Probe with Suction Cup inside Aquarium or
Wet/Dry Filter. Fully submerge probe under water.
Do Not submerge meter or allow meter to get wet.
Damage may occur.
Clock:
To read time, press and hold “CLOCK”
button. Release and display will return to
temperature mode. (Fig. B)
To Set Clock:
(Fig. A)
1. Slide switch to clock position.
2. Press and hold “HR” button for 3 seconds.
Hour numbers will advance to desired hour.
3. Press and hold “MIN” button for 3 seconds. Minute
numbers will advance to desired positions.
4. Slide switch to “TEMP” position after clock setting.
To Set °C or °F:
(Fig. A)
Slide switch upward for °C or downward for °F.
Fig. A
Fig. B
Email: info@lifegardaquatics.com
www.lifegardaquatics.com
