7
4. Install the Handlebar and Computer
(For Models of 20168 and 20169)
Insert the Hand pulse wires (58) from the Handlebar (3)
into the hole of Handlebar support (2) and pull them out
from the top end of the Handlebar support (2).
Attach the Handlebar (3) to the Handlebar support (2)
with two Bolts (42) and Arc washers (54).
Connect the Computer wire (14) and Hand pulse wires
(58) to the wires that come from the Computer (4). Then
fix the Computer (4) on the top of Handlebar support (2).
(See figure 4)
4. Install the Handlebar and Computer
(For Models of 20161, 20163 and 20166)
Cover the Handlebar (3) with Foam grips (27) and then
install the Round end caps (57) to the Handlebar (3).
Note:
Don
’
t need to Cover the Handlebar (3) with Foam
grips (27) and install the Round end caps (57) to the
Handlebar (3) for model of
20163
.
Attach the Handlebar (3) to the Handlebar support (2)
with two Bolts (42) and Arc washers (54).
Connect the Computer wire (14) to the wire that comes
from the Computer (4). Then fix the Computer (4) on the
top of the Handlebar support (2). (See figure 4)
5. Install the Seat Cushion and Seat Post
First remove three Nylon nuts (49) and Flat washers (12)
from underneath of the Seat cushion (6), and then
attach the Seat cushion (6) to the plate of Seat post (7)
with three Nylon nuts (49) and Flat washers (12) that
were removed.
Remove the Round Knob (9), and then insert the Seat
post (7) into the Bushing (8) of Main frame (1). Adjust
the Seat post (7) to the desired hole for the appropriate
position and tighten the Round knob (9) after adjustment.
(See figure 5)
